Remove non-friable asbestos – CPCCDE3014A

AIT regular course fee $300.00
CSQ Funding $225.00
Remaining fee payable by student $75.00

This unit of competency specifies the outcomes required to remove non-friable asbestos containing material (ACM). The unit includes preparing, containing and removing non-friable ACM, and includes knowledge of decontamination and disposal requirements.

Enquire about a course booking

Course name (required)

Are you over 18? (required)
YesNo

 
 

Site location for work may be either domestic or commercial, and may be a demolition site, a new work site or an existing structure being renovated, extended, restored or maintained.

Project sites may be construction sites and may also include ships, soils in relation to the non-friable asbestos removal process, and fences.

CSQ funding available as at 1 October 2017. Funding is limited

AIT regular course fee CSQ Funding Remaining fee payable by student
$300 $225 $75

This course is a one day course and is ideal for people already in or wanting to work in the building and/or demolition industries.

Workers and supervisors must be appropriately trained and hold certification for the Vocational Educational Training (VET) course appropriate to the class of asbestos being removed.

A class B asbestos removal licence only covers work for the removal of:

  • more than ten square metres of non-friable asbestos
  • any asbestos contaminated dust or debris associated with the removal of this non-friable asbestos.

The licence does not authorise the removal of friable asbestos (class A asbestos removal work).

PRE-REQUISITE:  Learners must hold CPCCWHS1001 Prepare to work safely in the construction industry (White Card) competency to be able to do this course.

Non-friable asbestos is bonded asbestos where there is no loose fibres that can become airborne.

It is usually found in cement sheeting, often called fibro, used in many Queensland buildings before 1990.

The sheeting was used for cladding, roofs and fences and can often be found as backing boards in wet areas like kitchens and bathrooms.

Where class B asbestos removal work is being carried out by more than one person, the licence holder must ensure a supervisor is readily available to the workers carrying out the asbestos removal work.

The course covers:

  • Work instructions and asbestos removal plans
  • PPE and tools used in removal of non-friable asbestos
  • Determining what is/isn’t non-friable asbestos
  • How to safely remove non-friable asbestos
  • Signage and barricade requirements
  • Decontamination procedures
  • Isolation of site
  • Containment of asbestos and safe disposal
  • Regulatory requirements and documentation

Although a licence is not required to remove ten square metres or less of non-friable asbestos material, all asbestos removal work must be carried out properly using safe work procedures. Refer to the WHS Regulation and How to Safely Remove Asbestos Code of Practice 2011 for more information.

Course fee: $500 per person

Reviews

There are no reviews yet.

Be the first to review “Remove non-friable asbestos – CPCCDE3014A”

White card